Tenyo Magic Forum

ØyvindK wrote: ↑

Tue Sep 27, 2022 3:46 am

In the video, they also skipped the part where the box is closed and locked
(and hence where the magic happens), and jumped straight to the sword insertion.

The video has a lot cuts that do not show the full presentation which i do not like

The trick is quite nice but has a too strong toy character for my taste

I suspect a lateral oblique displacement of the figure ...

Concerning Mr Danger, the video on the Tenyo Facebook site does show the full performance without any cuts.
I’m looking forward to adding this to my collection.
Plus, this looks like a trick that can be performed without worrying about it failing.

KirkW wrote: ↑

Wed Sep 28, 2022 8:25 pm

Concerning Mr Danger, the video on the Tenyo Facebook site does show the full performance without any cuts.
I’m looking forward to adding this to my collection.
Plus, this looks like a trick that can be performed without worrying about it failing.

I am completely unable to find that video. On the official Tenyo FB page, there seems to just be older videos, as far as I can tell. Do you have a link to the full performance video?

ØyvindK wrote: ↑

Thu Sep 29, 2022 4:52 am

KirkW wrote: ↑

Wed Sep 28, 2022 8:25 pm

Concerning Mr Danger, the video on the Tenyo Facebook site does show the full performance without any cuts.
I’m looking forward to adding this to my collection.
Plus, this looks like a trick that can be performed without worrying about it failing.

I am completely unable to find that video. On the official Tenyo FB page, there seems to just be older videos, as far as I can tell. Do you have a link to the full performance video?

Try this link:

https://www.facebook.com/sky.lo.1671/vi ... 1538501731

KirkW wrote: ↑

Thu Sep 29, 2022 10:34 am

ØyvindK wrote: ↑

Thu Sep 29, 2022 4:52 am

KirkW wrote: ↑

Wed Sep 28, 2022 8:25 pm

Concerning Mr Danger, the video on the Tenyo Facebook site does show the full performance without any cuts.
I’m looking forward to adding this to my collection.
Plus, this looks like a trick that can be performed without worrying about it failing.

I am completely unable to find that video. On the official Tenyo FB page, there seems to just be older videos, as far as I can tell. Do you have a link to the full performance video?

Try this link:

https://www.facebook.com/sky.lo.1671/vi ... 1538501731

Seems it isn't open for anyone to see. However, the official Tenyo page isn't a group, so there's no way of being a member there, so that's odd.

What is the FB page where you found that link? Is it a group?

KirkW wrote: ↑

Thu Sep 29, 2022 10:34 am

Try this link: https://www.facebook.com/sky.lo.1671/vi ... 1538501731

Kirk, the link do not work for me and i am a member of the T fb group

Hum????? Maybe this is a different Tenyo group. It’s hard for me to know since most everything is in Japanese.
Try this link:

https://www.facebook.com/groups/4559915 ... &fs=e&s=cl

KirkW wrote: ↑

Thu Sep 29, 2022 4:45 pm

Maybe this is a different Tenjo group ...

https://www.facebook.com/groups/4559915 ... &fs=e&s=cl

Kirk, thank you but in this group i am not a member

Is there a way for you to post a direct link to the video ?

Olaf S wrote: ↑

Thu Sep 29, 2022 5:51 pm

KirkW wrote: ↑

Thu Sep 29, 2022 4:45 pm

Maybe this is a different Tenjo group ...

https://www.facebook.com/groups/4559915 ... &fs=e&s=cl

Kirk, thank you but in this group i am not a member

Is there a way for you to post a direct link to the video ?

I wasn't able to post a direct link from the Tenyo group so I uploaded it to my YouTube site.

https://youtu.be/SulDQFQOqfU

OK now i am a member and made a screen video of Mr. Uncut



https://youtu.be/wmagpfbkxc8

Thanks. No obvious moves to see, so maybe they were able to make it fully automatic in operation. I do agree with Olaf that the doll is perhaps a bit too toy-like, though.

ØyvindK wrote: ↑

Fri Sep 30, 2022 3:23 am

No obvious moves to see, so maybe they were able to make it fully automatic in operation

I would say that this is a good challenge for the 3D printer

Maybe with a slightly more magical design ...

Olaf S wrote: ↑

Fri Sep 30, 2022 5:26 am

ØyvindK wrote: ↑

Fri Sep 30, 2022 3:23 am

No obvious moves to see, so maybe they were able to make it fully automatic in operation

I would say that this is a good challenge for the 3D printer

Maybe with a slightly more magical design ...

You seem to have mind-reading skills, Olaf.

ØyvindK wrote: ↑

Fri Sep 30, 2022 5:50 am

Olaf S wrote: ↑

Fri Sep 30, 2022 5:26 am

ØyvindK wrote: ↑

Fri Sep 30, 2022 3:23 am

No obvious moves to see, so maybe they were able to make it fully automatic in operation

I would say that this is a good challenge for the 3D printer

Maybe with a slightly more magical design ...

You seem to have mind-reading skills, Olaf.

A Vampire in a casket comes to mind.

ØyvindK wrote: ↑

Fri Sep 30, 2022 5:50 am

You seem to have mind-reading skills, Olaf.

Øyvind true, i can confirm that ♒︎ ∞

CollinW wrote: ↑

Fri Sep 30, 2022 7:26 pm

ØyvindK wrote: ↑

Fri Sep 30, 2022 5:50 am

Olaf S wrote: ↑

Fri Sep 30, 2022 5:26 am

I would say that this is a good challenge for the 3D printer

Maybe with a slightly more magical design ...

You seem to have mind-reading skills, Olaf.

A Vampire in a casket comes to mind.

Yes, that could be a good idea, the biggest issue is to make the posture of the figure so that it is suitable for the trick. I'm not good at drawing things, so I'd need to find a suitable picture/illustration to use.

But now that it has been mentioned, I guess you will have something ready even before I get around to plan anything.

Here's a nice write up about the 2022 Tenyo Magic Festival.
http://jpmagic.blog34.fc2.com/blog-entry-2039.html

I like the frame, easel, and cloth set that Tenyo offered to use in conjunction with The Final Piece. I think I'll 3D print an easel and frame after I received my copy.

Just received the new line (along with the +1) this weekend. Looking forward to digging in!

I preordered Mister Danger a couple of months ago and my order is still pending. Yet, I see others have received theirs.
I’m jealous!!

Well, I'm also still waiting, for all the new Tenyo's...

There is a delay in shipping to The Netherlands...

EvanS wrote: ↑

Sun Nov 20, 2022 8:35 pm

Just received the new line (along with the +1) this weekend. Looking forward to digging in!

You received Mr Danger?

@CollinW

Yessir!

Woohoo, Christmas comes early!

Tenyo hit a home run this year with Mr Danger, I love it!

I have some plans in the works for Mr Danger which includes.....of course 3D printing.

Yes, I received the new Tenyos too, on 30 November!

Mister Danger is really a gem!

So you ordered 3 copies Collin? 1 to break open and examine, I presume?

The others are ok too, especially the Mona Lisa one… I have seen a stage performance by Christian Farla with the Mona Lisa effect live, he made a touching story around it, but I could see that he used a transparent bag with 2 compartments…
The Tenyo version is much more clever!

But mechanically speaking the Mr Danger effect is the winner!

And indeed totally self-working!

So there you go Collin, you can warm up your printers!

Now that everything is available I am also on board but without the giant card

Honestly, I'm not that interested in tricks that look like plastic toys anymore