Page 1 of 1
Jumping Die
Posted: Mon May 29, 2023 6:54 pm
by PeterW
I find this particular effect to be very puzzling. Watching the video, I can understand what has to happen, but can’t grasp how it is happening! I love the simplicity of the props and the fact that everything can be examined!
See the effect here:
https://youtu.be/d-SbwUL-fUI
Re: Jumping Die
Posted: Mon May 29, 2023 9:24 pm
by Olaf S
I agree, a very surprising effect
I'm also puzzling over the working
Re: Jumping Die
Posted: Tue May 30, 2023 4:54 am
by ØyvindK
I also saw this the other day, and I do see how it's done, but it is a good trick. I think I'll do my own version of this, since it is so simple, but yet effective.
Re: Jumping Die
Posted: Tue May 30, 2023 6:58 am
by Rob Rand
Thank you Peter for mentioning this small but very nice effect!
I saw this effect too, and I love it!
I was surprised by the quick way the ribbon goes from left to right without any hesitation…
Yes this is very suitable for Øyvind and Collin to make a nice 3D printed version. Guys, time to warm up your printers
Re: Jumping Die
Posted: Wed May 31, 2023 4:28 am
by ØyvindK
Rob Rand wrote: ↑Tue May 30, 2023 6:58 am
Yes this is very suitable for Øyvind and Collin to make a nice 3D printed version. Guys, time to warm up your printers
Creating the props for this is pretty easy, the challenge is the performance. The performance in the video is very good (although there is a very minor exposure), and I am currently not sure how to pull it off properly. I think he is doing something clever that I have not yet figured out completely.
Re: Jumping Die
Posted: Wed May 31, 2023 4:41 am
by Olaf S
ØyvindK wrote: ↑Wed May 31, 2023 4:28 am
I think he is doing something clever that I have not yet figured out completely.
I was amazed that you understood the trick so quickly
I have not discovered any clues so far ...
Re: Jumping Die
Posted: Wed May 31, 2023 4:49 am
by ØyvindK
The working principle is very obvious to me, but as I said, his handling is clever, and I haven't completely figured that out yet.
Edit: I rewatched the video and I found the missing piece to the puzzle. Very clever indeed!
In a live performance done properly, spectators will never be able to spot how it's done, but they will probably understand what must have happened to make the die jump. Just not how.
Re: Jumping Die
Posted: Wed May 31, 2023 5:01 am
by Olaf S
ØyvindK wrote: ↑Wed May 31, 2023 4:49 am
I rewatched the video and I found the missing piece to the puzzle. Very clever indeed!
Will also look at it again and hope to discover some more clues
Re: Jumping Die
Posted: Wed May 31, 2023 8:55 am
by PeterW
Sometimes a solution comes to you when you least expect it! I’ve been just going about my day when inspiration hit me and I ran back and re-watched the video! Wow!!! Simple but very clever and that now reveals the missing piece of the puzzle! Amazing little trick, and wonderful misdirection! Love it!
Re: Jumping Die
Posted: Wed May 31, 2023 9:26 am
by Olaf S
Finally I found a very clear clue but the whole picture is not yet complete
I must continue to contemplate until enlightenment reaches me as well
Re: Jumping Die
Posted: Wed May 31, 2023 3:04 pm
by Rob Rand
My observations are:
1 CENSORED
2 CENSORED
Sorry this is a public discussion, so I censored my observations …
Re: Jumping Die
Posted: Wed May 31, 2023 4:12 pm
by PeterW
You are completely correct Rob!
Re: Jumping Die
Posted: Wed Jun 21, 2023 1:32 am
by magic11ryan
I really like this one too!
Re: Jumping Die
Posted: Wed Jun 21, 2023 9:34 am
by PeterW
I’ve also found what I believe to be the same effect under a different name called Rib-Block. See here:
https://www.martinsmagic.com/allmagic/s ... ay-leslie/. Notice the very clever use of the tacks on this version, it means the containment box can be made without any extra additions. As well as Jay Leslie and Mark Jacobs I also see the name John Snyder connected to the effect. I am unable to located it again, but on a past search I also came across photos of what might be the very first release of this effect. The block had dado’s cut across each face to assist in executing the effect. Maybe that’s where the name “Rib” came from. Cool to see the history and progression of the different releases with each subtle change!
Re: Jumping Die
Posted: Sat Jun 24, 2023 2:10 am
by Olaf S
Jumping Die by Willi Wessel
Sold for $1,255.00 on Quality Magic