Here you can discuss magic tricks that Tenyo enthusiast would enjoy but might not be aware of.
-
Olaf S
- Full Member
- Posts: 1727
- Joined: Thu Dec 08, 2016 11:11 pm
Post
by Olaf S » Fri Feb 07, 2020 9:00 am
ØyvindK wrote: ↑Thu Feb 06, 2020 2:17 pm
Most likely, yes. At least to people in here, should anyone want it.
I am also interested in your version, curious which design you come up with
Question => Is it absolutely necessary to use a rubber band for the trick
![Question :?:](./images/smilies/icon_question.gif)
-
ØyvindK
- Full Member
- Posts: 805
- Joined: Thu Jan 11, 2018 6:16 pm
Post
by ØyvindK » Fri Feb 07, 2020 10:15 am
Olaf S wrote: ↑Fri Feb 07, 2020 9:00 am
ØyvindK wrote: ↑Thu Feb 06, 2020 2:17 pm
Most likely, yes. At least to people in here, should anyone want it.
I am also interested in your version, curious which design you come up with
Question => Is it absolutely necessary to use a rubber band for the trick
No, not a rubber band. It's a narrow silk/satin ribbon.
-
Olaf S
- Full Member
- Posts: 1727
- Joined: Thu Dec 08, 2016 11:11 pm
Post
by Olaf S » Fri Feb 07, 2020 4:17 pm
ØyvindK wrote: ↑Fri Feb 07, 2020 10:15 am
No, not a rubber band. It's a narrow silk/satin ribbon.
Somehow, i had "rubber band" instead of "silk ribbon" in my brain
In one video the silk ribbon seems to be open at the ends,
in the other a closed loop, does both work ?
-
Olaf S
- Full Member
- Posts: 1727
- Joined: Thu Dec 08, 2016 11:11 pm
Post
by Olaf S » Sat Feb 08, 2020 4:21 pm
After some research I now know how it works
![⭐️](//cdn.jsdelivr.net/emojione/assets/3.1/png/64/2b50.png)
Is an ingenious and extraordinary principle
![👍](//cdn.jsdelivr.net/emojione/assets/3.1/png/64/1f44d.png)
But I do not know if it was improved later ...
-
Olaf S
- Full Member
- Posts: 1727
- Joined: Thu Dec 08, 2016 11:11 pm
Post
by Olaf S » Mon Feb 10, 2020 1:45 am
I just had an idea if it is not better to make a slit instead of the round hole
for the narrow silk ribbon ... In my opinion this could work even better ... As a
wood version this might be more difficult to realize than with a printed version
-
Simon Layland
- Full Member
- Posts: 429
- Joined: Sat Jun 13, 2015 11:31 pm
- Location: Melbourne , Australia
Post
by Simon Layland » Mon Feb 10, 2020 2:09 am
KirkW wrote: ↑Thu Feb 06, 2020 5:59 pm
ØyvindK wrote: ↑Thu Feb 06, 2020 2:17 pm
Olaf S wrote: ↑Thu Feb 06, 2020 2:02 pm
When your version is perfected - would it be available to others ?
Most likely, yes. At least to people in here, should anyone want it.
I'm In!!!!!
Me also
Simon from Aus (but English)
-
ØyvindK
- Full Member
- Posts: 805
- Joined: Thu Jan 11, 2018 6:16 pm
Post
by ØyvindK » Mon Feb 10, 2020 2:48 am
Olaf S wrote: ↑Mon Feb 10, 2020 1:45 am
I just had an idea if it is not better to make a slit instead of the round hole
for the narrow silk ribbon ... In my opinion this could work even better ... As a
wood version this might be more difficult to realize than with a printed version
Doing it that way is actually more difficult, I think. Imagining why is probably not so easy without a prototype/model in hand.
-
Olaf S
- Full Member
- Posts: 1727
- Joined: Thu Dec 08, 2016 11:11 pm
Post
by Olaf S » Mon Feb 10, 2020 6:13 pm
ØyvindK wrote: ↑Mon Feb 10, 2020 2:48 am
Doing it that way is actually more difficult, I think. Imagining why
is probably not so easy without a prototype/model in hand ...
Well, you could be right, today I did a little tinkering and built a small styropor version.
The principle works with my little styropor version unfortunately only halfway, but the ring
has passed the silk band ... One procedure has not yet become clear to me but it might only
work with the original round version, with my rectangular version it does not work completely
You do not have the required permissions to view the files attached to this post.
-
Rob Rand
- Charter Member
- Posts: 3392
- Joined: Mon Aug 26, 2013 6:00 pm
- Location: The Netherlands
-
Contact:
Post
by Rob Rand » Fri Feb 14, 2020 8:53 am
I’ve also tried to make a Lego version with a square gap instead of a round one, and it didn’t work at all!
![Smile :)](./images/smilies/icon_e_smile.gif)
-
Olaf S
- Full Member
- Posts: 1727
- Joined: Thu Dec 08, 2016 11:11 pm
Post
by Olaf S » Thu Feb 27, 2020 10:59 am
Hi Øyvind, are there any updates from your side ?
Did you manage to print a well working version ?
-
ØyvindK
- Full Member
- Posts: 805
- Joined: Thu Jan 11, 2018 6:16 pm
Post
by ØyvindK » Fri Feb 28, 2020 3:14 am
I've had a temporary drop in motivation lately, so I haven't really gotten any further on this. I will pick it up again at some point, though.
-
Richard W
- Global Moderator
- Posts: 1529
- Joined: Thu Jul 18, 2013 12:43 am
- Location: Phoenix Arizona U.S.A. Planet Earth
Post
by Richard W » Tue Mar 03, 2020 10:48 pm
Seen this bio of Terri Rogers maker of Blockbuster and a ton of other effects. Never knew any of this before as I never checked.
https://en.m.wikipedia.org/wiki/Terri_Rogers
Terri Rogers 01.png
https://m.youtube.com/watch?v=6qZM6mqsR8E
You do not have the required permissions to view the files attached to this post.
Last edited by
Richard W on Wed Mar 04, 2020 5:56 am, edited 1 time in total.
"let's continue on with this carnival-like atmosphere"
-
Richard W
- Global Moderator
- Posts: 1529
- Joined: Thu Jul 18, 2013 12:43 am
- Location: Phoenix Arizona U.S.A. Planet Earth
Post
by Richard W » Wed Mar 04, 2020 5:55 am
For the DIY minded Terri Rogers - Top Secret book in PDF format is still available on lybrary.com for $25.00.
Book form is $40.00 on Viking.com
1st edition 1998, original 128 pages, PDF 94 pages.
Table of Contents
Contents
Publisher's Note
Introduction
A Letter from Terri Rogers
Top of the Bill
The Boromian Link
Buckled Bunkum
Chess Mate
Mind Game
StarGate
Twisted - The Afghan Border Race
Word of Mind
The FlexiCard
Blink
*BlockBuster*
The Anatomy of a Magic Trick
The Magic Oblong
The Colour Changing Ring
The Three Colour Changing Rings
Addendum
https://www.lybrary.com/top-secrets-p-68781.html
"let's continue on with this carnival-like atmosphere"